Towing - SpeeCo 580899 Instrucciones De Montaje Y Funcionamiento

TOWING

This log splitter is equipped with pneumatic tires, a Class I coupler (2 in. diameter ball required) and safety chains. Before towing, the safety chains
must be secured to the hitch or bumper of the vehicle. Local regulations should be checked regarding licensing, lights, towing, etc. Turn fuel shut
off valve on the engine to the "Off" position prior to towing. Failure to do so may result in flooding the engine. Do not exceed 45 mph when towing
this log splitter. See also Towing Safety on page 4 of this manual.
TONGUE POSITIONS - TOWING AND OPERATING
Tongue Position – EXTENDED – Towing
To Tow:
• Extend Tongue
• Remove R-clip and pin securing the stand in the lowered position.
• Move the leg to the raised position and secure with R-clip and pin.
Tongue Position – RETRACTED – Operating and storage
For operation and storage:
• Remove R-clip and pin securing the stand in the stored position.
• Move the leg to the lowered position and secure with R-clip and pin.
• Retract the tongue.
K1646
K1647
Page 22