NSS Enterprises CHARGER 2717 DB Instrucciones Originales página 15

charger is being powered by anything other than
normal grid AC such as a conventional generator,
inverter, etc.
If the AC plug is disconnected during charge, the unit
will turn off as expected. The user may hear some
clicking noise, but should not be alarmed. This is the
Powered by Battery/DOE functionality checking for
AC connection.
How to read charging data from a battery charger
equipped with DeltaView® Link
DeltaView Link
DeltaView Link is a system that allows you to read
data from your battery charger using an app on your
smartphone. The battery charger transmits data to
your phone's Bluetooth receiver.
These instructions apply to Dual Pro battery chargers
manufactured after 11/29/16. The manufacturing
date is located on the barcode tag attached to the
pigtail cord coming out of the charger. This battery
charger is found on Champ Rider Scrubbers,
Wrangler 3330, Wrangler 2730, Wrangler 2625,
some Wrangler 2016 models, and Charger battery
burnishers.
Instructions
Step 1. Download the Pro Charging Systems "DeltaView
Link" app
For Apple iPhones: Go to the app store and search for
"DeltaView Link" by Pro Charging Systems, LLC.
For Android Phones: Go to the play store and search for
"DeltaView Link" by Pro Charging Systems, LLC.
Step 2. Turn on your phone's Bluetooth function. If your
Bluetooth is off, the app will turn it on for you when it
starts. Answer "yes" when prompted to turn on
Bluetooth.
Step 3. Locate the "DeltaView Link" icon on your phone
and press it to start the app.
Step 4. A list of all battery chargers that are connected to
AC power within range of your phone will appear. Tap on
a battery charger to select it.
Step 5. Follow the app prompts to read through the data
on your charger. You will find detailed information about
the last 100 charge cycles.