Mounting Your Bicycle - Xplova NOZA S Guia De Inicio Rapido

Mounting your bicycle

Shift the chain on your bicycle to the smallest sprocket of the cassette and then
remove the rear wheel. Align the bicycle chain with the smallest sprocket of the
cassette and then put on the chain as well as mount the bicycle on NOZA S' axle to
have the bicycle in a suitable position for riding.
Please use the bicycle quick release lever properly with care. When the arc of the
rotating arm of the quick release lever is toward outside, it means the lever is in a
released state. Rotate the rotating arm of the lever clockwise to tighten the quick
release lever. The rotating arm of the quick release lever should be placed on the
other side of the NOZA S' cassette.
Please refer to the following illustration for the installation of the thru axle bicycle.
Insert the thru axle from the other side of the cassette and tighten the axle.
Attention:
1. Please firmly tighten the quick release lever and the thru axle to
prevent damage to property or human body. If you cannot tighten the
quick release lever and the thru axle, please contact your dealer or
Xplova customer service. Please DO NOT attempt to use the NOZA S
in this situation.
2. When mounting the bicycle, please lift its front wheel and press the
frame down to make the bicycle firmly mounted on the NOZA S.
EN-7
Assembly Instructions