Installation Rules - La Cimbali M29 Start Uso E Instalacion

Installation, dismantling, and adjustments must only be performed by qualified and
authorized technicians.
Carefully read the warnings and rules in this manual because they provide important
information regarding safe installation, use and maintenance of the machine.
Keep this booklet handy for easy reference.
• Staff responsible for moving the machine must realize the risks in moving heavy loads.
Move the machine carefully, using the correct lifting equipment (fork lift, for example).
If moving the machine by hand, make sure:
- enough people are available for the task, depending on the machine weight and difficult
handling;
- to always use the necessary safety gear (shoes/gloves).
• After removing the machine from its packing materials, make sure that the machine and its safety
devices are intact.
• Packing materials (plastic bags, polystyrene foam, staples, etc.) must be kept out of the reach of
children because they are potentially hazardous. They must not be released into the environment,
but sent to special waste-disposal centres.
• Before plugging in the machine, make sure that the information on the nameplate (voltage, etc.)
matches that of the electrical and water systems.
• Check the condition of the power supply cord; if it is damaged it must be replaced.
• Completely unwind the power supply cable.
• The coffee machine should sit on a flat, stable surface at least 20 mm from walls and from the
counter. Keep in mind that the highest surface on the machine (the cup warmer tray) sits at a
height of at least 1.2 meters. Make sure there is a shelf nearby for accessories.
• Room temperature must range between 10° and 32°C (50°F and 90°F).
• An electrical outlet, water connections, and a drain with siphon must be in the immediate vicinity.
• Do not install in rooms (kitchens) that are cleaned with jets of water.
• Do not obstruct openings or ventilation and heat vents.
• Do not install the machine outdoors.

2. Installation Rules

WARNING
3 EN