Maintenance: Dirty Water Tank; Maintenance: Self-Cleaning Function - Sanitaire HydroClean SC930 Manual De Instrucciones

M INTEN NCE: SELF-CLE NING FUNCTION
1
60 seconds
Self-cleaning indicator
After use, turn power OFF, place the
handle in upright position and depress the
self-clean button. The indicator light will
blink for 60 seconds while clean solution
is dispensed on the brush roll and
vacuumed back into the dirty water tank.
Floor washer will shut off when cycle is
complete. Repeat as necessary. Empty
dirty water tank when finished.
3
45 seconds
45 second dry cycle
Pump activation lights OFF. No solution
flowing on brush roll.
NOTE:
Store floor washer in a protected, dry area. Since this product uses water, it
must not be stored where there is a danger of freezing. FREEZING WILL DAMAGE
INTERNAL COMPONENTS AND VOID THE WARRANTY.
10 www.sanitairecommercial.com
2
15 seconds
15 second wash cycle
Pump activation lights ON. Solution will
flow on brush roll.
4
Empty dirty water tank
SEE MAINTENANCE: DIRTY WATER TANK,
pages 8-9.