Cata Nonvirair Purifyer PRO Instrucciones Para La Instalación, El Uso, El Mantenimiento página 46

Press ON/OFF again to start the air diagnosis process. The control lights up all
the available operating modes and the front display shows the self-diagnosis
2
process.
The purifier starts to gently operate in AUTOMATIC MODE.
NOTE
Warning! This process can take up to 5 minutes. However, you can
change the operating mode if you prefer, taking into account that
the purifier cannot operate autonomously until results have been
generated.
Aire
limpio
Contaminación
moderada/alta
Once the diagnosis has been
completed, the purifier reports the
air quality in accordance with a
colour code.
Note: If the user has not changed
3
mode during the process, the
process will start to operate
autonomously in AUTOMATIC
MODE, adjusting the purification
speed in accordance with the
detected level of contamination.
46
: The indicator light is white during this process.
Contaminación
baja
Contaminación
peligrosa
Press the icon of the chosen filtration
mode. If you do not press anything,
the purifier will continue to work in
AUTOMATIC MODE.
4