Ibx S50L Manual De Usuario página 10

4. Speed internal parameter settings
4.1. How to use
In order to enter the temperature internal parameter setting mode, the user must introduce the
password. To do that, follow these steps:
4. Press
- The screen will display Lc
- The speed area of the screen will display the password value
5. Use
6. Press
If the password is incorrect, the display will return to the home screen.
If the password is correct, the display will show the temperature internal parameter settings mode.
Then:
4. Press
5. Use
6. Press
If no key is pressed for 1 minute, the display will return to the home screen.
4.2. Internal parameter tables
INDICATOR NAME
Lc Password
Proportional
Pd-
gain
Integral
Id-
coefficient
Acceleration
InT
time
Deceleration
dET
time
Speed lower
SdL
limit
Speed upper
SdH
limit
for 3 seconds.
to choose the required password value. See password values below.
to enter the value.
to modify each parameter.
to choose desired value.
for 3 seconds to return to the home screen.
FUNCTION DESCRIPTION
The password to modify the parameters in this
table is Lc = 3
Speed proportional gain.
Speed integral coefficient.
Time it takes for the motor to accelerate to the
new set speed.
Time it takes for the motor to decelerate to the
new set speed.
Minimum speed setting
Maximum speed setting
10
FACTORY VALUE
0
(1～100)
10
(1～100)
5
(1～60)
10
(1～60)
10
(20～6000)
20
(SdL～6000)
600