1. Safety Instructions
Connect the device to an earthed socket to ensure the safety of the machine
and the experiment. Make sure the voltage is the same as required by the
device.
The use of this instrument in flammable, explosive, poisonous, or highly
corrosive environments or with hazardous substances is forbidden.
Place the incubator on a horizontal, flat, clean, non-slip and stable surface.
Adjust the feet so that the device is leveled.
This item must only be used by qualified staff that has read the instructions
manual and knows how to operate it.
Do not place the device near any heat source. Keep away from high
magnetic fields. Do not put volatile, flammable and explosive materials in
the machine, otherwise it could cause an explosion or a fire.
Non-professionals must not disassemble or repair this machine.
Read the instructions manual before using this device.
• When working, wear the necessary personal protective equipment to avoid the risk of:
- Burns caused by contact with hot surfaces or materials
- Burns caused by splashing and evaporation of liquids
- Intoxication caused by release of toxic or flammable gases
• The device and accessories must be checked prior to every use. Do not use damaged
components.
• Beware of hazards due to:
Flammable materials or media with a low boiling temperature
-
Overfilling of vessels
-
Unsafe vessel
-
• Do not cover the device.
• Do not expose the device to rain, moisture or splashing as this might result in electrical leakage,
short-circuit or electric shock.
• In case the device is let idle or unsupervised, ensure the door is completely closed.
• Unplug by pulling always from the plug. Never pull from the wire.
3