Publicidad
Idiomas disponibles
Idiomas disponibles
3.Introduction for remote controller and light board
Introduction for remote controller and light board (standard)
Indicator plate(light board must be used associated with remote controller)
Defrosting preheat light
Running indicator
Remote signal receiving display
Wizard universal remote controller (They can respectively be used associated with the remote controller or
light board)
The following swing button, forced button, light button, purification button on the remote controller applies to
new special models, but not applies to ordinary models.
Temperature addition
Increase the setting temperature.
Temperature reduction
Decrease the setting temperature.
"ON/OFF"
Open or close the air-conditioner.
Fan speed -
Reduce fan speed in one gear.
Minimum wind speed will swich to
the automatic wind, and swich to the
highest wind when pressing again.
Timer
Setting timing ON/OFF.
Clock
Modify the current time of the
remote controller.
Lock
Lock the remote controller bottons.
Runing
Defrosting Timing
Protection
Figure 3
5
Timing indicator
Unit failure,protection light on
Emergency button
Remote controller does not work! You can
press this button for emergency operations.
Mode
Select modes, including automatic,
cooling, dehumidification, fan and
heating mode.
Fan speed +
Increase fan speed in one gear.
Highest wind speed will swich to the
automatic wind, and swich to the
minimum wind when pressing again.
Turbo
Enter the turbo function. Decide
whether
to
have
this
according to the actual model.
ECON
26 ℃
Automatically
setting
cooling or heating mode.
Sleep
Enter the sleep function. Decide
whether
to
have
this
according to the actual model.
Light
Forced closing or lighting of display
panel. Decide whether to have this
function according to the actual
model.
Up and down swinging
Open the external pendulum wind.
Left and right swinging
Open the internal pendulum wind.
function
in
function
Publicidad
