Dash Disassembly; Kit Preparation - Metra 99-7366B Instrucciones De Instalación

DASH DISASSEMBLY

1. Unclip and remove the factory radio trim
panel including the a/c vents. (Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Preparation
2
(Figure A)
(Figure B)

KIT PREPARATION

1. Cut the marked area in the dash cavity.
(Figure A)
2. Remove (1) 10mm nut holding the area
previously cut in step 1 to remove the
cut-out area.
(Figure A)
3. Snap the radio trim panel into the factory
trim bezel from the back side of the bezel.
Continue to Kit Assembly
|
1.800.221.0932 MetraOnline.com