Securing The Front Shelf Brackets; Installing The Front Shelf; Placing The Diffuser Plate - Pit Boss PRO Serie Manual Del Usuario

8. SECURING THE FRONT SHELF BRACKETS

Parts Required:
1 x Front Shelf Bracket / Left (#19)
1 x Front Shelf Bracket / Right (#20)
6 x Screw (#A)
Installation:
• Attach one Front Shelf Bracket to the front of the grill barrel by using
three screws. Install each screw halfway, then tighten completely
when all three screws are mounted and aligned properly.
• Repeat the same installation for the other Front Shelf Bracket.

9. INSTALLING THE FRONT SHELF

Parts Required:
1 x Front Shelf (#21)
2 x Washer (#B)
2 x Screw (#H)
2 x Nut (#I)
2 x Bushing (#J)
Installation:
• From underneath, insert the screw (from the outside) into the Front
Shelf Bracket and the Front Shelf, then add the bushing onto the
screw, the washer, then the nut. Repeat installation for the other side
of the Front Shelf.
NOTE: When installed correctly, the Front Shelf can be raised (for
use)and lowered (for storage) with ease.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.

10. PLACING THE DIFFUSER PLATE

Parts Required:
1 x Diffuser Plate (#18)
Installation:
• Place the Diffuser plate into Main Barrel so the central opening aligns
directly with the circular fire pot on the base of the Main Barrel.
NOTE: The Diffuser Plate does not require fastening.
10
8
A
19
9
I
J
B
H
21
10
18
20