Disabling The Security Sensor - SERVETTO 805.23.762 Montaje

Electric Servetto i3

4.2 DISABLING THE SECURITY SENSOR

If the Electric Servetto i3 is installed in walk-in closets/open wardrobes (Fig. 12), the security sensors can be disabled.
To disable the security sensors, press and hold button No.9 on the control unit (Fig. 2) for 10 seconds; when released, red LED
No. 8 will light up. The Electric Servetto i3 will now be able to operate without the security sensors connected.
WARNING: Please be more vigilant when the pull-down lift is being operated
without the sensors, as any obstacles will not be detected and the Servetto will
not stop automatically.
Servetto accepts no responsibility should a security sensor be disabled in
unsuitable circumstances and if this results in any direct or indirect damage to
persons, pets or property.
To reactivate the operation of the security sensors, press and hold button No.9 on the control unit (Fig. 2) for 2 seconds; red LED
No. 8 will remain lit to indicate that the sensors had previously been disabled.
Fig. 12
11