Mounting The Arms; Power Supply Connection - SERVETTO 805.23.762 Montaje

Electric Servetto i3

5.3 MOUNTING THE ARMS

Connect the cables and mount the arm on the fixing plate, as shown in the steps indicated in Fig. 18 and connect the other end
of the cables to the control unit (C in Fig. 1).
If required, connect the security sensors to its connectors 13 and 14 (Fig. 3) of the control unit.
WARNING: Check that the cables are not damaged or positioned in such a way that
they could cause the product to function incorrectly.
Do not cut or tamper with the cables in any way.

5.4 POWER SUPPLY CONNECTION

Connect the transformer to the mains (110-240 V, 50-60 Hz) and then connect the transformer to the control unit. The green
power LED (No. 5 in Fig. 2) must light up and be accompanied by a "BEEP".
Fig. 18
Fig. 19
15