Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MOVING PROJECTOR
Use the Carrying Handle when moving the projector.
Replace the lens cap and retract the ADJUSTABLE FEET
when moving the projector to prevent damages to the lens
and cabinet.
When this projector is not in use for an extended period, put
it into a suitable case (not supplied with this projector).
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
● Do not drop or bump the projector, otherwise damages or malfunctions may result.
● When carrying the projector, use a suitable carrying case.
● Do not transport the projector by courier or any other transport service in an unsuitable transport case.
This may cause damage to the projector. To transport the projector by courier or any other transport
service, consult your dealer for the best way.
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment.
COMPUTER AUDIO INPUT
COMPUTER INPUT/MONITOR
1/ AUDIO MONITOR
OUTPUT TERMINAL (ANALOG)
OUTPUT JACK
This terminal is switchable
This terminal is switchable
and can be used as Computer
and can be used as
Input or Monitor Output. Set
Computer Audio Input 1 or
up the terminal as either
Audio Monitor Output
Computer Input or Monitor
(variable).
Output properly before using
Set up the terminal as
this terminal.
either Computer Audio
Note: This terminal outputs
Input 1 or Audio Monitor
from
the
5
BNC
Output properly before
computer input on INPUT 2
using this terminal.
jacks only.
USB CONNECTOR (Series B)
When controlling a computer
with the remote control of
this projector, connect USB
terminal of your personal
computer to this terminal.
RESET BUTTON
This projector uses a micro
processor to control the unit, and
only occasionally, this micro
processor may malfunction and
need to be reset. This can be
done by pressing the RESET
button with a pen, which will shut
down and restart the unit. Do not
use
the
RESET
function
VIDEO INPUT JACKS
excessively.
Connect
video output from video
5 BNC INPUT JACKS
equipment to VIDEO/Y
Connect component video
jack
output (Y, Cb, Cr or Y, Pb,
component
Pr) from video equipment
outputs to VIDEO/Y,
to VIDEO/Y, Cb/Pb and
Cb/Pb and Cr/Pr jacks.
Cr/Pr jacks or connect
computer output {5 BNC
Type (Green, Blue, Red,
Horiz. Sync, and Vert.
Sync.)} from computer to
G, B, R, H/V, and V jacks.
COMPUTER INPUT
COMPUTER AUDIO
TERMINAL (DIGITAL)
INPUT 2 JACK
Connect a computer
Connect an audio
output (Digital DVI-D
output (stereo) from
type) to this terminal.
a computer to this
The
HD
(HDCP
jack.
Compatible) signal can
also be connected.
type
R/C JACK
When
Wired/Wireless remote
control as wired, connect
the Wired remote control
to this jack with a remote
control cable (optional).
CONTROL PORT CONNECTOR
When
controlling
computer with the remote
control of this projector,
connect the mouse port of
your personal computer to
this connector.
AUDIO INPUT JACKS
S-VIDEO INPUT JACK
composite
Connect
an
audio
Connect S-VIDEO
output from video
output from video
equipment to these
equipment to this
or
connect
jacks.
jack.
video
using
the
a
Publicidad
Tabla de contenido
