Publicidad
Idiomas disponibles
Idiomas disponibles
EN 50365
Bonne utilisation du casque
Etiquette de la visière
1
2
3
2.1.2
XXXXX
2
1.
Echelle n°
2.
Identification Fabricant
3.
Classe Optique
Résistance aux particules à grande vitesse – moyenne de l'énergie d'impact
4.
5.
Protections contre les projections liquides
Protection de l'arc électrique de court-circuit
6.
7.
Non adhérence des métaux solides et résistance à la pénétration des solides chauds
8.
Résistance à la détérioration de surface causée par des particules fines
9.
Résistance à la buée
10. Marque CE
11. Identification de l'organisme notifié.
INDUSTRIAL HELMET WITH INTEGRATED FACESHIELD
Risks from which PPE protects
The helmet MO-1 for industrial safety describes by this instruction manual protects:
Industrial safety helmets – EN 397
1.
2.
Electrical insulating helmets for use on low
voltage installations in class 0 (1000 V) – IEC EN 50365
Introduction
This manual must be read carefully both by the individuals who wear the helmet and by those
responsible for its maintenance. Keep this manual, because it represents, together with the purchase
invoice, the guarantee for the helmet.
These are the instructions for the use and maintenance of the MO-1 helmet. It is our hope that the product will
meet your needs and prove to be of use for many years.
A great deal of attention has been paid to the text and illustrations in this user's manual. Nevertheless, the
publisher cannot be held liable for any errors or for their consequences.
Suggestions regarding the product and its manual can be presented to our company, which shall take them into
account, should they result in concrete improvements.
CATU reserves the right to modify, even without advance notification, both the product and its accessories, as
well as their technical characteristics.
The companies, brands and products mentioned all represent registered or pending trademarks or titles.
Features
The performance characteristics for which the helmet has been designed are guaranteed only if it used correctly
and if maintenance is performed as described in the instructions.
Should this not be the case, then the protective features cannot be guaranteed.
The guarantees provided by CATU with regard to this product shall be null and void should the warnings,
precautions and instructions contained in the present manual not be followed.
After reading the manual, should you still have any doubts regarding the level of protection offered by the helmet,
the conditions for its use or the maintenance procedures, feel free to contact us at the numbers indicated.
Warnings
Failure to respect the warnings listed below could have grave, and even life-threatening, consequences.
This helmet is designed to provide protection from impact, from penetration from above, from crushing, from
tension and from exposure to flames, within the limits contemplated under the EN 397 Norm.
It is meant to reduce the effects of unforeseen events, but it cannot protect the head from all eventualities.
To ensure maximum protection, the helmet:
▪
MUST be properly placed on the head, and the webbing must be adjusted to ensure that the helmet fits
snugly, through with a certain degree of comfort.
▪
To ensure maximum stability of the helmet, always attach and adjust the chin-strap correctly; this will help
reduce shifting of the helmet resulting from certain environmental conditions.
▪
Do not place any outside objects between the padding and the parts of the helmet beneath it, given that
such objects, in the event of an impact, can transmit significant force to the head, with serious, potentially
life-threatening consequences.
▪
NEVER USE this helmet for driving or for sports activities.
▪
Inspect the helmet before and after each use, employing the inspection procedures described in this
manual and immediately replacing any worn or damaged parts exclusively with spare parts supplied by
CATU.
▪
NEVER alter or modify the helmet.
▪
NEVER attach accessories and/or decals or labels within 25 mm of the edge of the shell. Any modifications
or any utilisation of accessories other than those supplied by Catu S.A. may reduce the levels of protection
or the dielectric properties.
▪
NEVER use paints, solvents or detergents made from hydrocarbons on this helmet. Such substances can
damage the materials in a manner not visible to the eye, reducing their protective properties.
▪
Scratched or damaged visor should be replaced.
Precautions
▪
This helmet MUST be kept in a clean, dry, dark spot, not near sources of heat, and at a constant
temperature of between +5° and +40°C.
▪
The helmet should be washed with lukewarm water and neutral soap.
▪
NEVER keep the helmet inside the vehicle when not being used. Not only will it be exposed to sunlight
(UV rays and heat), but, if not adequately set in place, it could also be thrown about inside the vehicle in
the event of a sudden stop
.
Sharp impact
Following a sharp impact or stress, the helmet should not be used again. Internal breakage which cannot be
seen could decrease resistance to subsequent impacts. Should you have any doubts, do not hesitate to contact
CATU.
Chemical agents
All chemical products, corrosive substances and solvents could, in certain concentrations, prove dangerous for
this product. If it is possible or necessary for your helmet to come into contact with such substances, consult
Catu, indicating the name or the compound, and you will be given an appropriate response following careful
study of the specific case.
10/20, Avenue Jean Jaurès 92220 Bagneux France Tél : +33(0)1 42 31 46 00 www.catuelec.com
MO-185...
"Double triangle" Symbole de la
1.
norme IEC EN 50365:2004
Classe d'appartenance
2.
3.
Numéro progressif de production
journalière
4.
Date de production
5.
EN 166 marquage
6.
IEC 61482-1-2
4
5
6
7
8
9
10
11
B
3
8
9
K
N
CE
0497
Declaration of conformity
The manufacturer:
10-20 Avenue Jean Jaurès – 92220 Bagneux – France
Declare that for PPE, helmet for industrial safety model MO-1, the declaration of conformity is available at the
following web site by entering the part number:
and at the following link:
https://www.dropbox.com/sh/43car9th27vtdd5/AADSL9n2nKwqHI8sBzYR2UUIa?dl=0
or can also be reached using the following QR Code:
Life expectancy
The helmets model MO-1 if stored properly has a life expectancy of 8 years.
In case of normal use have life expectancy of 5 years.
The helmets model MO-1 have an excellent resistance to aging, the life expectancy of use depends on stress
sustained during the whole life of the helmet. In order to extend as much as possible, the life expectancy of use
must comply the requirements of use and maintenance described in this manual.
CATU is improving the operator safety by implementing the possibility to know your safety
equipment status and to be able to track its compliance vs actual standards. A
DATAMATRIX code is added on your product, scan it to connect yourself to Check
me by Sicame. Contact CATU to subscribe to the application and ease your material's
management.
Disposal
CER Number = 20 01 39 plastic material.
CER Category: urban solid waste and similar refuse from commercial industrial, and institutional activities
(including materials for recycling).
Accessories and spare parts
Accessories
Codes
Description
M-881837
Red head band with 4 hooks
M-881838
Withe and red velcro
M-883208
Arc flash side protections
M-87384
Carring bag
Maintenance
Clean the helmet according to the following procedures:
1.
Dismantle the helmet.
2.
Clean all the pieces inside and outside, using only neutral soap and lukewarm water, with the exception
of the following pieces:
▪
Wash the shell with cold water and neutral soap. Do not use solvents; leave to dry at room
temperature.
▪
Wash the visor with lukewarm water; dry using a soft cloth to avoid scratches the surface.
Before assembling the helmet make sure that all the pieces are dry.
The helmet can be stored in the packaging plastic bag or in it carrying bag like the M-87384 without direct
sunlight (optional accessory).
Disinfecting procedure
It may occur that you have to disinfect the helmet, in which case, use only compatible products with the following
materials:
▪
Polypropylene (shell and front-shell)
▪
Polycarbonate (visor)
▪
Polyamide 6 – ABS (internal harness)
Immerse the helmet in a solution containing lukewarm water and disinfectant liquid or powder (medical
chirurgical product certified, E.g. Amuchina) following the warnings given by producer regarding time and
dosage.
Disassembly
For the outside, proceed as follows:
1.
Unscrew the screws (fig. 1, point 1 and 6) on the
sides.
2.
Remove the front-plate (fig. 1, point 5), having care to
remove the central part from its support.
3.
Remove the visor (figure 1, point 4).
4.
Remove the On/Off stopper (fig.1, point 3).
5.
Remove the part of the helmet (fig. 1, point 2).
For the inside:
1.
Extract the clips of the webbing from the insertion
points on the shell.
2.
Extract the clips from the adjustment band.
Assembly
For the outside, proceed as follows:
1.
Position the screw in the special housing found in the
shell (Fig. 1 point 1)
2.
Insert the On/Off stopper (Fig. 1 point 3)
3.
Insert the visor (Fig. 1 point 4)
4.
Position the mask (Fig. 1 point 6)
5.
Lightly tighten the screw (Fig. 1 point 1 and 6)
6.
Repeat the operation on the opposite part.
7.
Firmly tighten both screws
For the inside:
1.
Insert the clips in the adjustment band, as shown in
figure 4, being careful to place the longest on the front
side
2.
Insert the entire webbing and place the clips in the
special housings found on the shell, beginning from the
front and gradually moving to the right and to the left,
finishing in the rear
Adjustments
There are two types of adjustment.
Width:
by utilizing the specially
designed system, the
helmet size can be
changed from 52 to 64 cm.
CATUcom_9912077_01
CATU S.A.
www.catulec.com
https://www.check-me.io
Spare parts
Codes
Description
M-882677
Spare faceshield
M-881836
Spare fleece headband
M-882671
Spare chinstrap with chincup
Fig. 1
Height:
When installing the webbing, the
wearer can decide how the
helmet is to sit on the head. The
height is adjusted by moving the
clips from insertion point no. 1
and no. 2 in figure 2.
For intermediate adjustments,
use only a portion of the clips.
MO-1 ED. 09.2020
Publicidad
