Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the plastic expansion fasteners holding wheel well liner to fascia (each side).
Remove the remaining screws and plastic expansion fasteners from along the bottom of the
fascia including the 10mm nuts holding the underbody panel to the trunk pan.
©2016,2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Pull back wheel well liner to access the hidden screw (10mm socket) holding the upper
portion of the fascia to the quarter panel (each side).
Gently remove the fascia and unplug wiring. Set bumper fascia aside.
Sheet 5 of 21
36548NP
5-3-17
Rev. F
Publicidad
