Tripp-Lite B032-HUA2 Manual Del Propietário página 7

Operation
Combination
[Scroll Lock]
[Scroll Lock]+
Firmware Upgrade Utility
To update the B032-HUA2's firmware, perform the following:
1. From a computer that is not part of the KVM installation, download the
latest Firmware Upgrade package for the B032-HUA2 from Tripp Lite's
support site, www.tripplite.com/support.
2. Disconnect the B032-HUA2 from your KVM installation. Press and hold
the Remote Port Selector's pushbutton. While you are still holding the
pushbutton, connect the KVM cable's purple USB connector to a USB
port on the computer to which you have downloaded the Firmware
Upgrade package.
3. The B032-HUA2 now enters Firmware Upgrade Mode. The two port LED's
flash together to indicate the unit is in Firmware Upgrade Mode.
Note: While the B032-HUA2 is in Firmware Upgrade Mode, normal keyboard and
mouse functions are suspended. You must complete the firmware upgrade or exit
Firmware Upgrade Mode to regain normal control of the console.
4. Run the Firmware Upgrade Package file; the Firmware Upgrade Utility
main screen appears.
5. Click Next to perform the upgrade. As the upgrade proceeds, status
messages appear in the Status Messages panel and the progress towards
completion is shown in the Progress bar.
6. After the upgrade has completed, a pop-screen appears to inform you
that the procedure to upgrade was successful. Click Finish to close the
Firmware Upgrade Utility.
7. Set up your KVM installation again.
16-11-116-93366A.indb 7
Function
[d] [Enter] Invokes the Video Sync function, which allows the
KVM to store the monitor's EDID information to
optimize display resolution
[e] [Enter] Enables/disables the Power on Detection feature
[r] [Enter] Resets hotkeys to the default setting
7
12/15/2016 10:43:24 AM