Setting Up Your Tv; Connecting The Aerial And Vcr - JVC D.I.S.T. 1250i Manual De Instrucciones

Setting up your TV

Caution
• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and VCR

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
If connecting a VCR, follow A A A A →
B B B B → C C C C .
If not connecting a VCR, follow 1 1 1 1 .
To operate T-V LINK functions, a T-V
LINK compatible VCR must be connected to
the EXT-2 terminal on the TV. For details
about T-V LINK functions, see "T-V LINK
FUNCTIONS" on page 6.
• A video can be viewed from the VCR
without performing C. For details, refer
to your VCR instruction manual.
• To connect additional external devices,
please see "Connecting the external
devices" on page 48.
• To connect additional audio equipments,
see "Using additional audio equipments"
on page 50.
• To connect a device (such as DVD player)
with the digital output terminal for Dolby
Digital, see "Listening to Dolby Digital
audio" on page 50.
• When a decoder is connected to a T-V
LINK compatible VCR, set the
DECODER (EXT-2) function to ON. For
details, see "Using the DECODER (EXT-
2) function" on page 47. Otherwise, you
will not be able to view scrambled
channels.
Back of the TV
4
EXT-
R L
DIGITAL
AUDIO IN Pr Pb
COAXIAL
OPTICAL
WOOFER
AUDIO OUT
SUB R L 1
EXT-
WOOFER
2
EXT-
5
SURROUND
REAR
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
Aerial
75-ohm
Coaxial
Cable
Y
3
EXT-
5
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
3