Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If you have any problems with your appliance, you should
check the troubleshooting prior to calling Customer Care.
If the appliance is not working, check:
That there is power to the appliance.
•
The house fuses are intact and the fuse in the plug has not
•
blown.
The fridge has not been turned off (page 9).
•
The plug socket is functioning fine. To check this, plug another
•
electrical appliance in to see if the socket is faulty.
If the appliance is working, but not very well, check:
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The doors are closing properly.
•
The cooling system at the rear of the appliance is clean and free of
•
dust, and not touching the rear wall.
There is enough ventilation at the side and rear walls.
•
This can be due to the decor door(s) not being properly fitted,
•
causing the fridge door to not close properly thus letting warm air
in. If you are at all unsure, ask your fitter to check the decor doors.
If the appliance is noisy, check:
The appliance is level and stable.
•
The side and rear walls are clear, and there is nothing resting on the
•
appliance.
Note: The cooling gas in the refrigerator may make a slight
•
bubbling or gurgling noise, even when the compressor is not
running.
Page 12
of
20
Publicidad
Tabla de contenido
