General Instructions - iDance GROOVE 1000 Manual Del Usuario

GENERAL INSTRUCTIONS

Before connecting the speaker, in order to protect your System, the UNIT must be POW-
ERED OFF, MASTER VOLUME set to minimum.
1. Connect the AC cable to the unit and your wall socket.
2. Plug the Microphone on the "MIC" input with a 6.3 connector or XLR.
3. Plug external audio source (CD, DECK, MP3, DVD, etc) on "LINE IN" input.
4. POWER ON GROOVE 1000: Blue led status.
5. Set the volume on the middle level on the MIC and LINE IN input.
6. Increase Progressively the Master volume.
7. Set TREBLE and BASS controls to equalize the sound.
8. Red LED light Status: overload power. Decrease the volume.
Caution:
Any microphone near the Speaker Front Grill will create feedback effect and it damage
the system.
P.1