General Operations; Bluetooth Operation - iDance CYCLONE 1000 Manual De Instrucciones

General operations

Front Panel Operation
1. Standby-On: Long press and hold to power on and off.
2. Select an input source
Press on the unit to select an input source.
When switch to Bluetooth mode, the item will come with voice prompt if connected successfully.
When insert USB/TF card or connect other audio input, the product will automatically switch to a related
mode. If USB/TF card is not inserted or other audio input in not connected, the product cannot be selected
the related mode, in order to reduce the switching times for selecting input source.
3. Play/Pause
When play in USB/TF/Bluetooth mode, press
4. Previous track/Next track
In USB/TF/Bluetooth Mode, press on the unit to skip to the previous track. Press
to the next track
5. Adjustment Lighting mode
Press and hold light switch button to select light mode
Tap the light switch button to select light color
Short press to turn off / turn on the light
Charging instructions
This unit operates on a built-in Li-ion battery that can be recharged from a power adaptor (included)
CHARGING THE BATTERY FOR FIRST TIME
Charge the built-in Li-ion battery a minimum of 3 hours prior to first use.
Connect a power adaptor (see "Power connection") into the main unit and auto to charging the internal Li-ion
battery.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the operation may become intermittent. When
the internal battery charge is low, the BATTERY INDICATOR will show low level alerting you to recharge the internal
battery as soon as possible.
Note:
1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you
switch off the unit power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully
charging it again.
3. Rechargeable batteries need to be cycled for maximum performance and longer battery life. If you don't
use the player that often, be sure to recharge the battery at least once a month in order to keep the internal
battery working properly.
Battery Note and Care
• Do not burn or bury batteries.
• Do not puncture or crush.
• Do not disassemble.
• Do not dispose of batteries in fire, batteries may explode or leak
• Li-ion batteries must be recycled. Do not dispose of in the trash.
• Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings are correct for the
battery pack being charged.
• Charge batteries on a fireproof surface and away from flammable items or liquids.
• Batteries should NEVER be left unattended while charging. Only adults should charge the batteries.
Follow the manufacturer's instructions for charging the product and do not charge longer than recommended.
Unplug the charger when the battery is charged or not in use.
to pause, and press again to resume play
on the unit to skip
EN3

Bluetooth operation

Pairing a Bluetooth Device for the First Time
1. Power on the unit by press the Power button, and tap mode button to enter Bluetooth mode.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, select the Cyclone 1000 in your Bluetooth settings to pair.
If your device requests a password, enter the default password "0000".
Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth
devices.
3. When successfully paired and connected, a sound " Connected " will issue from the unit, After initial pairing,
the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your
device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a Bluetooth device, use the native controls on the connected Bluetooth Device to select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth Device.
3. Audio played through the connected Bluetooth Device will now be heard through the speakers.
4. Adjust the VOLUME control to obtain the desired volume level.
5. Press Power button again to turn off the unit.
Specification
• Output power: 100 Watts
• Speaker driver: 1x5.25"dual coil woofer speaker +2x1" tweeter
• Passive radiator: 1x5.25"
• Input: Bluetooth / 3.5mm Aux in / USB / TF card
• With vibrant LED light display
• Waterproof: IPX5
• Built in 2200mah Lithium Battery
• 5V/2A Micro USB port for charging
EN4