Zyxel ZyWALL 70 Manual Del Usuario página 6

1 Click MAINTENANCE in
the navigation panel and
then Device Mode.
2 Select Bridge and
configure a (static) IP
address subnet mask and
gateway IP address for
the ZyWALL's LAN, WAN,
DMZ and WLAN
interfaces.
3 Click Apply. The ZyWALL
restarts.
Skip to Section 5 if you have
servers that you need to be
accesible from the WAN.
4 Internet Access Setup
Enter the Internet access information exactly as given to you.
If you were given an IP address to use, select Static in the IP Address Assignment drop-down list box and
enter the information provided.
Note: The fields vary depending on what you select in the Encapsulation field. Fill them in with the
information provided by the ISP or network administrator.
Click Finish when you are done.
ENGLISH
5