Control Panel - mabe Aqua Saver LMH19585XPNYS0 Instructivo

Control panel

Operation sequence: To start operating, turn knob 1 and place the indicator on the program
of your choice. Turn knobs 2, 3, 4 and 5 to select the different washing options according to
your laundry load. Press start/pause (botton 7).
5
5
1
Program selection
Turn the knob to switch between the available
programs according to the type of laundry.
Use the cycles recommended for each type of
clothes to obtain top performance in washing
and care for your clothes.
2
Water level
There are four water levels and an
automatic sensor. Select the one you need
or allow the automatic sensor to do it for
you.
Note: As this washing machine saves a great
amount of water, you will notice that the
clothes are not completely submerged in
water. This is normal.
3
Temperatures
Select between the 4 temperature levels, or
allow the automatic sensor to decide
according to the
(automatic sensor position).
4 Washing level
There are 4 levels and one automatic level,
select according to how dirty your clothes are,
or allow the automatic sensor to do it for you.
Spin level
5
Select between the 4 spin levels, or allow the
automatic sensor to do it for you.
54
LMH19585XPNYS0 and LMH19585XPNYU0 models
1
2 2
8
selected program
3
6 7
6
Personal touch
Repeatedly press the selection button to
choose the separate wash cycle stages or the
combination of stages that you require to
only wash, only rinse, wash and spin, etc. The
lights will turn on to indicate the selected
features.
7
Start/pause
With this button you start running your
washing machine or pause it once it starts. To
restart just press the button once more.
8
Delay start
This button allows you to program the time
at which you need the wash cycle to start.
Press the delay start button repeatedly until
the screen displays the delay time in which
your washing machine will start to run. The
amount is shown in minutes with 30 minute
intervals.
9
Alarm
By just pressing it, this button allows you to
activate or deactivate the end-of-cycle alarm
that consists of an audible signal once your
washing machine completes the wash cycle.
Once the alarm is activated, the alarm will
turn on a red led on the washing machine
display.
4
9