mabe Aqua Saver LMH19585XPNYS0 Instructivo página 70

Operating
Possible cause
problems
• (Momentary) interruption of
Clothes are
electric power.
too wet.
Some types of fabric feel
•
damp when rinsed with cold
water.
Some programs have a low
•
default spin time; such as,
color,
wash.
• You could have poured in too
much detergent, used high
foam detergent, or washed
clothes with low level of
dirtiness.
causes can generate excessi-
ve foam. This could have
caused an inefficient spin
cycle.
Liquid soap • Incorrect
or softener dispenser. If you fill above
stains. the maximum level line, the
liquid detergent or softener
campartments can overflow
and stain the clothes.
• Dispenser is too dirty.
Powder soap may leave
•
Powder
residues on the clothes.
detergent
residues on
clothes.
Your
•
optimizes the soap feature by
using less water.
70
What to do
•
•
•
delicates, express
•
•
Any of these
use of the •
•
•
•
•
washing machine
•
•
You can use the manual spin option (check the
manual cycle programming section), to spin
again for a few minutes.
You can program an extra spin cycle with the
cycle programming knob in the the extra spin
position.
You can program a longer spin cycle with the
spin knob, from the minimum with "gentle" to the
maximum with "intense".
In case the clothes are too damp, if you want
you can use the extra spin feature.
If you see that the clothes have too much soap,
select "rinse" in the personal touch feature to
perform an extra rinse cycle.
Do not fill above the maximumlevel line for
softener or liquid detergent. Follow the
instructions of the manufacturer and of the use
of this dispenser.
Clean your dispenser at least once a month.
It is recommended to use liquid detergent.
Always use the dispenser, the washing machine
will automatically dispense at the right time.
Reduce the amount of soap to improve the rinse
cycle.
In personal touch, select the heavy duty option.
You can program an additional rinse cycle with
the "heavy duty" option.