BMV 5 Serie Manual Del Usuario página 64

Fig. I
Connect branch A8, black coaxial socket housing (antenna connection) from on-board monitor wiring harness A,
to coaxial pin housing (57) at on-board monitor radio (14).
Connect branch A9, angled coaxial socket housing from on-board monitor wiring harness A, to coaxial pin
housing (58) at on-board monitor radio (14).
Connect branch A13, black 17-pin socket housing from on-board monitor cable wiring harness A, to black 17-pin
pin housing (59) at on-board monitor radio (14).
Fit cable tie (33) in hole (60) in mounting bracket for on-board monitor radio/CD changer (18).
Secure cables of connected branches A8 and A9 from on-board monitor wiring harness A and, if fitted,
tie on-board monitor radio/CD changer control line with cable tie (33).
Fit branch A15, neutral 6-pin pin housing from on-board monitor wiring harness A, in retaining clip (7) (will be fitted
later on mounting bracket for video module at front).
Tie back branches A6 and A7, angled coaxial socket housing from on-board monitor wiring harness A, on on-board
monitor wiring harness A with cable strap (32).
Continue with Section 2.4
2-51