EN
FR ES
• Slip the seat onto the seat frame.
• Reattach the 3 straps under the front of the seat.
• Reattach the 3 straps under the rear of the seat.
• On each side of the seat Velcro® the fabric over the stroller frame.
• Feed the waist straps through the slots in the seat.
• Reinstall the shoulder and crotch straps. See Section 12.
18 Removing the Rear Bench Seat Fabric
The rear bench seat fabric is removable for washing.
• Detach the 3 Velcro® straps found under the bench seat. See Figure 18.1.
• Remove the crotch strap. See Section 13.
• To reassemble the rear bench seat, feed the plastic end of the crotch strap through the slot in the fabric and bench seat.
• Reattach the 3 Velcro® straps under the rear bench seat.
19 Rain Cover (OPTIONAL)
NOTES: The rain cover should only be used with the canopy. If using a car seat, then set the car seat in the rear position.The rain cover can
be used with the stroller in either the long or the short positions. Use Figure 19.1 for these instructions.
• Make sure the canopy is in the open position.
• Carefully open the rain cover to its fullest.
• Place the rain cover over the stroller with the long flap toward the rear of the stroller. Make sure the front seam is over the front edge of the
canopy. See Arrow A.
• Pull the long flap through the rear handlebar just below the corners of the handlebar. Pull each of the rear sides of the rain cover around
the outside of the handlebars. See Arrows B.
• Pull the long flap down and attach the 4 Velcro® attachments around the vertical frame to secure this long flap in place. Do this for both
sides. See Arrows C.
• Pull all 4 corners of the rain cover down towards the ground and attach the Velcro® straps around the frame corners. There are 2 sets of
Velcro® straps at each corner. These straps are positioned differently so they will work in either the long or short position of the stroller.
Attach the straps to the closest frame tube depending on which position the stroller is currently in. See Arrows D.
For use ONLY on the Joovy Caboose VaryLight stroller. Never leave this cover in place with child in stroller when
exposed to direct sun or high temperature, as temperature inside may be excessive.
Maintenance
Inspect all of the parts of the stroller periodically to ensure that they are secured, not torn or damaged and functioning properly. Any missing,
broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only original
manufacturer's components should be used. If needed, please contact Joovy.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth.
Always allow the fabric to completely air dry before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or
other harsh environments. Use a sponge or cloth dampened with warm water and a mild household soap or detergent to clean the wheels
after such use.
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES - Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
This product is not a toy. DO NOT allow children to play with it.
SATISFACTION GUARANTEED
CANADA - ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
WARNING
!