Controls - Uline H-4564 Manual Del Usuario

ON/OFF Key:
Turn the power on or off.
Zero Key (ZERO):
Zeros display for next weight.
'ENTER' key to set parameters and
other functions.
Tare Key (TARE):
Deducts the container weight from
pieces weight.
Change number key ' ^ ' to set
parameters and other functions.
Pretare Key (PT):
Allows user to manually key in TARE
value.
Spaces right '>' to change different
numbers on the display. Also
used to set parameters or other
functions.
6 OF 62

CONTROLS

primary function
secondary function
Accumulate Key (M+):
M+
Adds the value to the
Print
accumulation memory. Zero
display and press this key to show
current total value.
Print Key (Print) Prints weight data
on piece of paper.
Spaces left ' < ' to change different
numbers on the display. Also
used to set parameters or other
functions.
Gross weight/Net weight (G/N):
Toggle between Gross weight and
net weight. Display shift is only
available after using tare/pretare
functions.
Acts as a clear key (C) to reset
parameters or other functions.
Unit Key (U):
Selects weighing units:
pounds or kilograms.
Acts as an escape key (ESC)
to return the scale to normal
operating mode.
0721 IH-4564