VOLTOMAT HEATING GR-107937.2 Manual Del Usuario página 96

GR-107937.2
PARTS DESCRIPTION
1. Glass panel
2. Rear cover
3. Control panel
4. Mechanical power switch
5. Hooks / Rubber supports
6. Feet
FEET ASSEMBLY
1. Ensure the heater is unplugged.
2. Set the heater upside down.
3. Loose the screws on the bottom of heater.
4. Secure the foot plates to the base by using the screws to fix firmly.
WALL MOUNTED
1. Ensure the heater is unplugged and the power switch is off.
2. Drill two holes on the wall according to below chart. Insert the dowels and then the long screws. Fix firmly.
(see picture 1)
3. Attach the two hooks onto the back surface of the appliance by using the available small black screws. Use
the screws to fix the rubber supports onto the holes of the back surface of the appliance. (see picture 2)
GBR