Regalo 1230 Manual Del Usuario página 11

STEP 3
Secure the hook and loop straps & attached buckles around the top and
bottom banister adapters.
Thread strap around banister
post and through the buckle
side of the strap.
On the top banister posts there
are locking tabs. Close these
to lock the strap position.
NOTE: The buckle can be rotated to any point around the banister post so
that it is out of sight.
STEP 4
Once both mounted level poles are securely mounted on both sides of the
opening, see page 14.
Pull the strap so that it is tight
and fold it over to connect the
hook side of the strap to the
loop side.
Using the hex key provided,
insert the key into the screw
and rotate it clockwise until the
screw is snug. This will tighten
the strap and secure the gate
to the banister post.
Once correctly positioned,
pull the strap tight around the
banister post.
Repeat all steps for other
banister post mounts.
English 11