Opening The Door - Miele PFD 104 SCVi Instrucciones Breves De Manejo

Lavavajillas industrial
Ocultar thumbs Ver también para PFD 104 SCVi:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
en - Before using for the first time
Therefore, please enter the water hard-
ness:
____________ °dH
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
 Set the water hardness level in your
area and confirm using OK.
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages  
 
Refill rinse aid
may appear.
 Add salt and rinse aid if necessary
(see the "Dishwasher salt" and "Rinse
aid" sections in the "Before using for
the first time" chapter).
 Select OK to confirm the messages.
The programme selected will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated running time for the programme
selected.
40
Refill salt
and

Opening the door

In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This function can be deactivated if you
wish.
This dishwasher has a motorised door
opener which is activated by knocking
on the door front (Knock2open func-
tion).
 Knock twice in quick succession on
the top third of the door front.
The door will open a little.
 Hold the door at the top edge and
pull the door out of the lock.

Publicidad

Tabla de contenido
loading

Tabla de contenido