Switching On The Dishwasher; Selecting A Programme - Miele PFD 104 SCVi Instrucciones Breves De Manejo

Lavavajillas industrial
Ocultar thumbs Ver también para PFD 104 SCVi:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50

Switching on the dishwasher

 Open the stopcock, if it is closed.
 Open the door.
 Make sure the spray arms can rotate
freely.
 Touch the  sensor control.
If the dishwasher has been switched
off for longer than 1 minute, you will
need to hold the  sensor control for
a bit longer (wipe protection).
The programme selected will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated duration for the selected pro-
gramme.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described in the "Programme
chart" later on in this booklet.
 Touch the sensor control for the pro-
gramme you want.
The sensor control for the selected pro-
gramme will light up.
Further programmes can be selected
under .
 To do so, touch the  sensor con-
trol.
The first of the further programmes will
appear in the display.
 Use the  sensor controls in the
display to select the programme you
want.
You can now select programme op-
tions.
If any programme options are selected,
the appropriate sensor controls will also
light up.
en - Operation
45

Publicidad

Tabla de contenido
loading

Tabla de contenido