c. Continue to route the hood switch harness across the firewall, securing to the existing
factory harness with (9) wire ties.
d. Continue to route the hood switch harness behind the battery to the TIPM.
2. Access the connectors underneath the TIPM
a. Access the connectors underneath the TIPM by disen-
gaging the two locking tabs and tilting forward.
3. Connect the hood switch wire
a. Remove the gray "B" connector from the TIPM.
** Note: Connectors are labeled on the edge of the TIPM near the
connectors.
"B" Connector
4 of 9
Locking Tabs