Enerpac WFL 221 Hoja De Instrucciones página 5

B
A
C
Figure 1 - Work Support
G
F
Figure 2 - Venting Through Side Port
(Using additional tubing and fitting)
2b. Lightly lubricate the provided O-Ring (item C) and install it in the
counterbore around the manifold breather port.
2c. Remove the breather fitting (item A) from the side breather port and
plug the port using a 1/8 NPT pipe plug.
2d. The breather fitting can be reused at a non-flooded area of the fixture.
D
E
C
A
B
C
D
E
F
G
H
H
A
Figure 3 - Venting Through Manifold Port /
Hydraulic Manifold Mounting
(5)
EEEE
Breather Fitting
Manifold
Breather Port
O-Ring
Manifold
Hydraulic Port
Hydraulic Port
Tubing
Fitting
Plug
C C
32