[999] Reset To Factory Defaults; Placement Testing Of Wireless Devices - Johnson Controls Tyco HSM2HOST Manual Del Usuario

[804][999] Reset to factory defaults

Selecting this option resets HSM2HOST programming to factory default settings.

[904] Placement testing of wireless devices

The following test modes are available:
[904][001]-[248] – Test wireless zones
l
[904][521]-[528] – Test all repeaters
l
[904][601]-[632] – Test all wireless keys
l
[904][701]-[716] – Test all keypads
l
Two test results are provided:
24-hour: Average results of signal strength testing over a 24-hour period.
l
Now: Signal status results of the current test.
l
A flashing Trouble LED indicates RF interference. The following status indicators may be displayed:
LCD Icon*
Strong 1
Good 2
Poor 3
NotTest 5
NotTest 5
*For Icon keypads, digit 1 indicates 24-hour test results; digit 2 indicates Now test results.
+For LED keypads, the first digit indicates 24-hour results; the second digit indicates Now test results.
Note: For EN/UL/ULC installations, only STRONG signal levels are acceptable.
LED+ Status
9 Strongsignalstrength
10 Goodsignalstrength
11 Poor signalstrength
13 Displayedasthe Nowresultif notestwasperformed
13 Alwaysdisplayedasthe 24-hour resultwhentestingwirelesskeys
- 13 -