42733-01 04/26/2007
opEraTIoN
This appliance is for household use
only.
1. place the fan on a dry, safe, flat
surface where it cannot fall or
be pulled by the cord.
2. The power/Speed Control
should always be oFF before
plugging or unplugging the fan.
plug the fan into a grounded
120-volt aC electrical outlet
(ordinary household current).
do NoT use any other type of
outlet. Make sure that the rated
voltage of the fan is the same as
the power source before plug-
ging it into the power source.
3. use the power/Speed Control
to turn the fan "oN" or "oFF".
See Figure 13.
4. To select the speed, move the
power/Speed Control from oFF
to the desired speed setting:
o (off ), I (low), II (medium), III
(High). See Figure 13.
angle
adjustment
knob
11