DENTSPLY SmartLite PS Manual De Instrucciones página 5

Audible signals
Signal short blip:
Start and end of curing cycle.
Repetitive short blip approximately every 40 seconds (battery light flash
red):
Device needs re-charging.
Blip followed by 4-tone melody:
LED-tip is not attached to handpiece or malfunction of device: Do not use
device.
INDICATIONS
Intra-oral light curing of direct restorative materials, adhesives, and sealants which cure
at a wavelength of 450 - 490 nm.
CONTRAINDICATIONS
Use for indirect restorations:
The SmartLite PS LED curing light should not be used for the curing of luting cements
for indirect restorations (e.g. ceramic inlays), as no data exist to support the use of
SmartLite PS with indirect restorations.
Use in patients prone to photobiological reactions:
Do not use the SmartLite PS LED curing light on patients with a history of photobiological
reactions (including patients with Urticaria solaris or erythropoietic protoporphyrie) or
those currently undergoing treatment with photosensitising pharmaceuticals.
WARNINGS
The SmartLite PS LED curing light should not be used as a tissue retractor, as this may
damage the connection between LED tip and handpiece.
Do not use a damaged device, e. g. if among others the glass cover of the LED Tip is
scratched, broken or missing.
Do not use device when malfunction is indicated by audible signal blip followed by
4-tone-melody.
Do not use for voltages different from the range indicated on the charging unit.
Note: To disconnect the power supply, the charging device must be unplugged.
Always unplug the charger before disinfecting.
PRECAUTIONS
This device is intended to be used only as specifically outlined in these Directions for
Use. Any use of this device inconsistent with the Directions for Use is at the discretion
and is the sole responsibility of the practitioner.
Anyone with a history of retinopathy should consult their eye specialist before operating
this unit. Use the SmartLite PS LED curing light extremely carefully and comply with all the
necessary safety precautions (including wearing suitable, light filtering safety glasses).
3