Directions For Use - DENTSPLY SmartLite PS Manual De Instrucciones

Directions for Use

Pen-Style, High-Power LED Curing Light
The SmartLite PS LED curing light is a pen-style, high-power output, cordless light
®
polymerisation device for use in dentistry.
SmartLite PS LED curing light is characterised by:
• Small size and low weight
• Cordless operation
• Powerful 5-watt light emitting diode (LED) of latest technology, placed at tip head,
acting directly on the material to be cured
• Polymerisation area of 8.0 mm in diameter
• Freely adjustable LED Tip, rotating by 360°
• Interchangeable tip providing a renewable light source
• 5° angulation of light probe for optimum access
• Standard 0-second curing cycle
• Noiseless and air emission free
• Rechargeable battery with long life
Caution: For dental use only. In the U.S.A.: RX only.
Before installing this unit, read the operating instructions carefully.
Always adhere strictly to these operating instructions.
SmartLite PS LED curing light – Operation at a glance
ON/OFF key
Activates device and starts or disrupts the 0-second curing cycle.
Battery light
Continuously green (only indicated when SmartLite PS handpiece is in-
serted into the charger):
SmartLite PS unit is fully re-charged and ready for operation.
Flashing green (only indicated when SmartLite PS handpiece is inserted
into the charger):
SmartLite PS unit is still being re-charged.
Fast flashing red:
Approx.  minutes curing time left – SmartLite PS device needs re-charging.
Slowly flashing red:
Battery is fully discharged (no curing time left) and needs re-charging.
English