DENTSPLY SmartLite PS Manual De Instrucciones página 5

1.1 SmartLite PS curing light – operation at a glance
®
ON/OFF key
Activates device and starts or disrupts the 10-second curing cycle.
Battery light
Continuously green (only indicated when SmartLite
inserted into the charger): SmartLite
for operation.
Flashing green (only indicated when SmartLite
inserted into the charger): SmartLite
Fast flashing red: Approximately 2 minutes curing time left – SmartLite
light needs recharging.
Slowly flashing red: SmartLite
left) and needs recharging.
Audible signals
Short blip: Start and end of curing cycle.
Repetitive short blip approximately every 40 seconds (battery light flashes red):
SmartLite PS curing light needs recharging.
®
Blip followed by 4-tone melody: LED tip is not attached to handpiece or
malfunction of device: Do not use device.
1.2 Indications
• Intra-oral light-curing of direct restorative materials, adhesives, and sealants
which cure at a wavelength of 460 - 490 nm.
1.3 Contraindications
• Luting of indirect restorations.
• Use in patients prone to photobiological reactions (including patients with solar
urticaria or erythropoietic protoporphyria) or those currently undergoing treatment
with photosensitizing pharmaceuticals.
PS curing light is fully recharged and ready
®
PS curing light is still being recharged.
®
PS curing light is fully discharged (no curing time
®
PS curing light handpiece is
®
PS curing light handpiece is
®
PS curing
®
3