Armrests; Headrest; Seat Heater - Grammer MSG97 Manual De Instrucciones

Seat functions and operation
A rm rests * * *
The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired
position (5-steps) and tighten the nut again
( ). Replace the cap onto the nut.
H eadrest * * *
The headrest can be individually adjusted for
height by pulling it upward over the various
increments up the end stop.
By pushing foreward or rearward the angle of
the headrest can be adjusted individually.
To remove the headrest, pull it over the end
stop.
Seat h eater * * *
The seat heater can be turned on/off by
pressing the switch.
0 = seat heater OFF
1 = seat heater ON
* if fitted ** optional extra
GB
25