Vereinfachte Eu-Konformitätserklärung - SSS Siedle IQ HTS Informacion De Producto

Technische Daten
NEO006.0-I-X-12
Betriebsspannung:
100–240 V AC, 50/60 Hz
Betriebsstrom: 160 mA
Ausgangsspannung:
12 V DC +/-5 %
Ausgangsstrom: 0,6 A
Umgebungstemperatur:
+5 °C bis +40 °C
Abmessungen (mm) B x H x T:
36 x 59 x 41
Vereinfachte
EU-Konformitätserklärung
Der Hersteller: S. Siedle & Söhne
Telefon- u. Telegrafenwerke OHG
Adresse: Bregstraße 1
D-78120 Furtwangen
erklärt, dass das Produkt:
Type:
IQ HTS
die grundlegenden Anforderungen
der nachstehenden EU – Richtlinien
erfüllt:
Funkanlagenrichtlinie 2014/53/EU
Der vollständige Text der EU-Kon-
formitätserklärung ist unter der fol-
genden Internetadresse verfügbar:
https://www.siedle.com
Pfad: Deutschland > Home >
Service > Download > Handwerk
und Großhandel > Zertifikate,
Bescheinigungen, Leuchtendaten >
Konformitaetserklaerungen > I
English
Application
In-house telephone for 1+n tech-
nology with WLAN interface for
mobile extension through the Siedle
app.
With the call, speech, door release
and light functions on the indoor
station and on a smartphone with
the Siedle app.
The storey call is also available on
the in-house telephone.
Performance features:
• WLAN interface for the Siedle app
• The Siedle app behaves like an
indoor device connected in parallel
• Additional indoor stations can be
connected in parallel
• Door release and light button
integrated
• Integrated audio privacy function
• Call volume up to max. 83 dB(A)
Additional indoor station power
supply required.
If the power supply is not con-
nected, the door release and WLAN
interfaces will not work.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Note
For use only in dry indoor atmos-
pheres.
Scope of supply
• IQ HTS (base plate and housing
with circuit board)
• Receiver
• No-tangle cord
• Operating instructions for the end
customer
• This product information
Terminal assignment
1, 7 System line 1+n
ERT Storey call button
DC, DC Operating voltage
Mounting
Strip back cable to appr. 80 mm.
1 Recommended mounting height
appr. 1.50 m/4.9 ft to centre device.
2 Open the device from the back
by releasing the base plate with the
locking Lever.
3 When mounting directly on the
wall, fasten the base plate using
4 screws, paying attention that
the plate is the right way up (top
marking).
4 When mounting on a switch box,
use the screw openings in the centre
of the device, paying attention that
the plate is the right way up (top
marking).
5 Install in accordance with the
wiring diagram. The cores of the
installation cable must be stored
inside the free installation space in
the base plate.
6 Insert the coloured plug of the
spiral cable into the socket at the
housing. A distinct click is audible
when the plug is correctly inserted.
7 Insert the other end of the spiral
cable into the receiver until the plug
clicks audibly into place. This con-
nection can no longer be detached.
8 Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
9 To remove the housing, press
the lock upwards using a flat blade
screwdriver. The circuit board and
receiver remain on the upper part of
the housing.
3