Fitting & operation information:
Please refer to the
instruction diagrams (P.35 -
Pushchair
1-
2-
Front wheel
3-
4-
Rear wheel
5-
6-
Front wheel
7-
swivel lock
8-
Brake
9-
10-
Harness
11-
12-
13-
14-
15-
16-
17-
Cosatto changing
18-
bag (sold
separately)
Backrest
19-
20-
Calf support
21-
22-
Hood cap
23-
24-
Hood
25-
26-
27-
28-
29-
30-
Bumper bar
31-
32-
3
Opening:
Release auto lock (a) then pull the handle upward (b) until a "click" is heard (c) and
the hinge is locked in place.
Check the chassis has locked in place.
Adjusting handle position:
Fitting:
Removing:
Fitting:
Removing:
Applying:
Releasing:
Applying:
Releasing:
Opening:
Closing:
Adjusting the strap length:
Slide the strap adjustor to suitable length (a, b & c)
Adjusting the shoulder strap position:
Satisfactory shoulder strap position:
Harness tension:
Always make sure that the harness is correctly tensioned to ensure maximum
protection for your child.
You should only be able to insert 2 fingers between the shoulder strap and waist
strap.
NOTE: Winter/ Summer clothing can make a difference to the size of your child.
Removing:
Unzip the rear of the seat cover to access the retainers (a).
Push the shoulder strap retainer through the backrest (b).
Push the waist strap retainer through the backrest (c).
Pull the crotch strap through the seat (d).
Refitting is a reversal of this procedure.
Fitting:
Open the harness (refer to step 11) and remove the chest pad & crotch pad (b).
Push the harness straps through the footmuff (c).
Attach the footmuff fabric fasteners at the rear of the backrest (d).
Refit the chest pads & crotch pad then close the harness (refer to step 12).
Adjusting:
Using the rear pockets:
Lowering:
Raising:
Fitting:
Removing:
Fitting:
Opening:
Extending:
Using the ventilation panel:
Removing:
Removing the hood fabric:
Fitting:
Opening:
43):