System Requirements
To use the Epson printer and its software, your computer system should meet or exceed the following
requirements:
Windows System Requirements
Microsoft
®
Windows
®
7, Windows Vista
or higher
Mac OS X System Requirements
Mac OS
X 10.4.11, 10.5.8 or 10.6.x
®
Note: Visit Epson's support website at www.latin.epson.com for the latest in compatibility and
drivers for your Epson printer (website only available in Spanish and Portuguese).
Important Safety Instructions
Before using your Epson product, read and follow these safety instructions:
■
Be sure to follow all warnings and instructions marked on the product.
■
Use only the type of power source indicated on the product's label.
■
Use only the power cord that comes with the product. Use of another cord may cause fires or
shock. Do not use the cord with any other equipment.
■
Place the product near a wall outlet where the plug can be easily unplugged.
■
Avoid plugging the product into an outlet on the same circuit as a photo copier or air control
system that regularly switches on and off, or on an outlet controlled by a wall switch or timer.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the product, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the
total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's
ampere rating.
■
Always turn off the product using the
flashing before unplugging the product or cutting off power to the electrical outlet.
■
If you will not be using the product for a long period, unplug the power cord from the electrical
outlet.
■
Place the product on a flat, stable surface that extends beyond its base in all directions. It will
not operate properly if it is tilted or at an angle.
■
Make sure the back of the product is at least 4 inches (10 cm) away from the wall.
■
Leave enough space in front of the product for the paper to be fully ejected.
®
, Windows XP Professional x64, or Windows XP SP1
P
power button, and wait until the
P
power light stops
System Requirements
9