Pair To Your Bluetooth® Phone - FRIEQ BTA03 Manual De Instrucciones

3) When the battery is fully charged, the red indicator light will turn blue.
Disconnect the charger from the headset and the outlet. The headset is
ready to use.
NOTE
- For first time use, please charge the headset fully.
- The fully charged battery has power for up to 30 hours of talk-time and music
streaming time, and up to 900 hours of standby time. However, the talk and
standby times may vary when used with different mobile phones or other
compatible Bluetooth® devices, usage settings, usage styles, and
environments. When the battery power is low, the headset will remind you by
voice prompt "Battery low" every 20 seconds, and the red indicator light will
start to flash.
- For using the BTA03 with iPhone, an additional battery meter feature will be
activated and the remaining battery capacity will display on your phone.
Pair to your Bluetooth® phone
Before you use your headset the first time, you must pair the unit with a
Bluetooth®-enabled mobile phone. Pairing is a one-time process and is
required only for the first connection with the mobile phone. The BTA03 can be
connected with two mobile phones simultaneously.
1) Keep the BTA03 within 1 meter range of a Bluetooth®-ready mobile
phone.
2) Press and hold the Power button for about 5s; the indicator light will flash
red and blue intermittently. The device is now in pairing mode.
[Voice Prompt: Pairing]
3) Find the Bluetooth® setting of your mobile phone and start the search for
Bluetooth® devices. (For further details, please read the operating
instructions of your mobile phone).
4) From the list of devices found, select the "BTA03."
3