Turning Headset On/Off - FRIEQ BTA03 Manual De Instrucciones

5) If required, enter the PIN code "0000" and confirm the entry. Once the
pairing process is successful, the BTA03 will connect to the mobile phone
automatically then switch to standby mode; the indicator will flash blue
every 5 seconds.
[Voice Prompt: Pairing successful]
[Voice Prompt: Phone connected]
△
Note
!
If pairing is not completed within 2 minutes, the headset will turn off. If this
happens, please repeat the pairing steps.
1) The BTA03 supports multi-connection that allows for the simultaneous use
of the BTA03 with two mobile phones. After paring successfully with 2
mobile phones, switch off the headset and switch on again. The headset
will connect to both mobile phones automatically. Otherwise, you can
connect the headset on the cellphone manually.

Turning headset on/off

Turn on your headset
Long press the On/Off for 3s to turn on your headset. If your headset has completed
the pairing process successfully, when the headset is turned on, it will connect to the
phone you last connected to automatically. Please ensure your phone's Bluetooth®
function is active.
[Voice Prompt: Power on]
[Voice Prompt: Phone connected]
Turn off the headset
Long press the power button for 3s to turn off the headset. the Red indicator will flash
red.
[Voice Prompt: Power Off]
Note:
To conserve power, if the headset is not connected to a device for approximately 10
minutes, the headset will turn off automatically.
Wearing your headset
According to your preference, you can wear the headset on your left or right ear. The
adjustable head strap design allows for a comfortable fit.
4