Reset The Bta03; Safety And General Information - FRIEQ BTA03 Manual De Instrucciones

call conversation has ended.

Reset the BTA03

The BTA03 can be paired with up to eight mobile phones. You can delete the
pairing list and reset the headset to the factory settings by doing the following:
1) The headset must be turned on and not be connected to any mobile phone
or device.
2) Press and hold the On/Off, Volume(+) and Volume(-) buttons
simultaneously for approx. 5 seconds until the indicator light flashes red 3
times.
If the paring list was deleted, the headset will return to stand-by mode without
connection.

Safety and general information

1) Please read this User's Manual carefully and follow all instructions.
2) To avoid any damage or malfunction of the device, do not drop the device
from high places.
3) Keep device away from humidity, water, and any other liquid. If the device
is exposed to water, moisture, and other liquids, do not operate it to avoid
any electrical shock, explosion, and damage to the device or yourself.
4) Do not place or keep this device near any heat sources, such as direct
sunlight, radiators, stoves, or other apparatus that produce heat. This may
cause an explosion, degrade the performance, and/or reduce battery life.
5) Do not modify, repair, or disassemble device (especially the battery). Doing
this will void the warranty.
6) Do not place heavy objects on the device.
7) Use only the supplied and approved chargers.
8) Unplug this device when unused for long periods of time or during lightning
storms.
The battery used in this device may present a risk of fire or chemical burn if
9)
mistreated.
6