Using The Bta03 - FRIEQ BTA03 Manual De Instrucciones

Using the BTA03

Voice-Dialing
In standby mode, press the On/Off quickly to activate the voice assistant of the
cellphone for voice dial and other voice commands.
Note: voice dialing is available only for the first device if two mobile phones are
connected. The connection sequence can be determined by reconnecting
manually.
Last number re-dialing
In standby mode, double press the On/Off and the last number you dialed will
be re-dialed.
Note: the last number re-dialing is available only for the first device if two
mobile phones are connected. The connection sequence can be determined
by reconnecting manually.
Answering a call
Press On/Off quickly to answer the incoming call. Otherwise, BTA03 supports
voice recognition to answer the incoming call by saying "YES."
Reject an incoming call
Press and hold On/Off for 3 seconds to reject the incoming call.
Transferring a call
Press and hold Volume (+) for 3 seconds to transfer the call between the
phone and headset.
Ending a call
Press the On/Off quickly to end a call.
Call-waiting
- If there is an incoming call while a call is in progress, press On/Off quickly to
accept the waiting call and end current calling.
- If there is an incoming call while a call is in progress, press and hold On/Off
for 3 seconds to accept the incoming call and place the current call on hold.
Note:
The same operation could be performed in case of multi-connection.
Volume adjusting
Press the Volume(+) and Volume(-) button to adjust the volume.
Mute
While a call is in progress, press and hold the Volume decrease button for 2s
to mute the headset. A reminder tone will be heard every 10 seconds. Repeat
the operation to un-mute.
Streaming music
The BTA03 supports A2DP profile that allows for wireless streaming of stereo
music from a phone or other Bluetooth-enabled music device. The music will
pause automatically while a call is dialed out/incoming, and resume when the
5