BH FITNESS YF98 Instrucciones De Montaje Y Utilización página 8

ASSEMBLY INSTRUCTIONS.
The assistance of a second person is
recommended when assembling this
unit.
STEP 1
Position the front stabiliser bar with
wheels, insert the bolts, fit the flat
washers cap
securely.
Position the machine's rear stand on
the rear stabiliser bar, insert the bolts,
fit the flat washers cap nuts and then
tighten securely.
STEP 2 - FITTING THE PEDALS.
The assembly instructions for the
pedals must be followed to the letter,
fitting these incorrectly could damage
the screw thread on either the pedal or
the crank.
Right and left refer to the position that
the user adopts when sitting on the
saddle to do the exercises.
The right-hand pedal, marked with the
letter, screws onto the right-hand
nuts and tighten
crank, also marked with an (R), in a
clockwise direction. Tighten securely.
The left-hand pedal, marked with the
letter (L), screws onto the left-hand
crank, also marked with an (L), in an
anti-clockwise
securely.
8
direction. Tighten