Important Notice - SOUNDMASTER RCD5000WS Manual Del Usuario

Skip Mode
1. During play or pause mode, press the SKIP UP button to go to the next track.
2. During play or pause mode, press the SKIP DOWN button to go back to the previous track.
Programming
In case of Playing Audio CD/MP3 disc
The programming should be done during STOP mode
1. Press the MODE button, the LCD display will show P01.
2. Use the SKIP UP or SKIP DOWN button to select the desired track.
3. Press the MODE button again to store the selected track in the memory, the LCD display will show P02 and
flash continuously.
4. Repeat step 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the memory for CD disc
and 99 tracks in the memory for MP3 disc.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP/USB button.
7. To cancel the programming list, press the STOP/USB button and set the FUNCTION switch to OFF position.
BLUETOOTH STREAMING
1. Set the FUNCTION switch to BT/AUX position. The LCD display will show "bt" and the bluetooth icon will flash.
2. Turn on your Bluetooth of your Bluetooth device and search the boombox for connection. Your Bluetooth device
should find "RCD5000".
3. If the connection is successful, the bluetooth icon on the LCD display will stop flashing.
4. Select and play the audio files though your Bluetooth device.
5. To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device
BLUETOOTH STREAMING THROUGH NFC PAIRING
1. Set the FUNCTION switch to BT/AUX position. The LCD display will show "bt" and the bluetooth icon will flash.
2. Enable your NFC function of your Bluetooth device and place the device near the NFC sensor on the CD door
for 5 to 10 seconds.
3. If the connection is successful, your Bluetooth device will show that it is connected and the bluetooth icon on
the LCD display will stop flashing.
4. Select and play the audio files though your Bluetooth device.
5. To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair with that device next time when you turn on
the unit and that Bluetooth device.

IMPORTANT NOTICE

Automatic standby mode
To comply with the ErP2 directive, the unit automatically switches to standby after approx. 11 minutes without a signal.
(For instance in CD-Stop mode). To switch the unit on again, please follow the instructions mentioned in instruction
manual.
SPECIFICATIONS
Frequency Range:
Power Supply:
Specifications are subject to change without further notice.
3
FM 87.5 - 108 MHz
AC 100-240V ~ 50/60Hz
DC 12V (UM-2 x 8)
RCD5000 English Instruction Manual