Environmentally-Friendly Disposal - Valentin ILX 56/8 Guía De Referencia Rápida

DANGER!
Danger to life and limb from power supply!

Do not open the casing.
CAUTION!
Two-pole fuse.

Before opening the housing cover, disconnect the printing system from the mains supply and wait for a moment
until the power supply unit has discharged.

Environmentally-Friendly Disposal

Manufacturers of B2B equipment are obliged to take back and dispose of old equipment that was manufactured after 13 August
2005. As a principle, this old equipment may not be delivered to communal collecting points. It may only be organised, used and
disposed of by the manufacturer. Valentin products accordingly labelled can therefore be returned to Carl Valentin GmbH.
This way, you can be sure your old equipment will be disposed of correctly.
Carl Valentin GmbH thereby fulfils all obligations regarding timely disposal of old equipment and facilitates the smooth reselling
of these products. Please understand that we can only take back equipment that is sent free of carriage charges.
The electronics board of the printing system is equipped with a battery. This must only be discarded in battery collection
containers or by public waste management authorities.
Further information on the WEEE directive is available on our website www.carl-valentin.de.
English
ILX
105