SCHUBERTH SRC‑System Guia De Inicio Rapido página 5

SRC
Quick Start Guide
S Y S T E M
Visit www.schuberth.com/src-system to experience an interactive
demonstration of the SRC-System™ functions.
(You will find the serial number on the size label attached to your
SRC‑System™).
Caution To fully understand the proper use of the SRC‑System™,
:
it is necessary to read its comprehensive user guide.
Caution: Make sure that your headset is fully charged for at least
4 hours before initial use.
10
EN
Channel A button
Mobile button
Channel B button
Volume up /
Forward Button*
Volume down /
Rewind Button*
* only for telephones that support A2DP
Attach the SRC-System™ to your helmet.
Turn on the SRC-System™.
1. Press the mobile button steadily for at least 4 seconds.
2. Led indication: 3 blue flashes.
3. Audio feedback: ascending tone (low‑high).
Pairing to a GPS device.
Caution If you are also using a mobile phone, this
:
must be connected to the navigation system too.
1. Switch on your SRC‑System™.
2. Hold down the volume up button on the SRC‑System™ for
at least 6 seconds, until the red and blue lights are
flashing quickly at the same time.
3. Search for the Bluetooth ® SRCS device on your GPS screen.
4. If your GPS device prompts for a PIN or passkey, enter
0000 (4 zeros).
11